Product specifications

[9] Start Redirect Mode
6-4 Configuring the Module in a DIGITAL MultiSwitch 900
[9] Start Redirect Mode
The Start Redirect Mode option redirects the DIGITAL MultiSwitch 900
Chassis Manager setup port to the setup port of any network module (such as the
VNswitch 900FX) that is installed into the MultiSwitch 900. This option allows you to
configure or obtain status of an installed network module by accessing the specified
network module’s installation menu.
After you choose the Start Redirect Mode option from the DIGITAL
MultiSwitch 900 INSTALLATION MENU, the screen prompts you for a slot
number, as shown in the following example. After you enter the number of the slot in
which the VNswitch 900FX is installed, the console is redirected to this slot.
NOTE
The slot number may change to reflect the slot number in which your module is
installed.
The following example shows you how to redirect the console to a specific slot:
If the redirection is successful, after you press Return, the VNswitch 900FX
INSTALLATION MENU appears on your screen. If the redirection is not successful,
for example, you entered an empty slot number, you can press Return to start again at
the DIGITAL MultiSwitch 900 INSTALLATION MENU.
Enter the slot number for redirection (1-8): 3 <Return>
Console redirected to 3: VNswitch 900FX
Attempting connection [Ctrl/C to Abort]...
Connection successful!