Product specifications

Configuring the Module in a DEChub ONE 5-7
[4] Configure IP
[4] Configure IP
This option provides you with IP configuration selections.
NOTE
For any of the IP Configuration menu options to take effect, the module needs to
be reset. Use [2] Restart with Current Settings from the
VNswitch 900FX INSTALLATION MENU. Allow approximately one
minute for the module to restart and complete self-test.
The following example shows the dialog associated with this option:
The following pages describe the IP Configuration options:
Topic Page
[1] Set SNMP Read/Write Community 5-8
[2] Set In-Band Interface IP Address 5-9
[3] Set Out-of-Band Interface IP Address 5-10
[4] Set Default Gateway 5-11
VNswitch 900FX
=========================================================
IP CONFIGURATION
[1] Set SNMP Read/Write Community
[2] Set In-Band Interface IP Address
[4] Set Default Gateway
[5] Return to Main Menu
Enter selection number: [n]
<Return>
[3] Set Out-of-Band Interface IP Address
* * * * * * * * * * * * * * * * * * * * * * * * * * *
Configuration will not take effect until module is
restarted
* * * * * * * * * * * * * * * * * * * * * * * * * * *
=========================================================