Product specifications

[1] Restart with Factory Defaults
5-4 Configuring the Module in a DEChub ONE
[1] Restart with Factory Defaults
This option initializes the module’s configuration to factory default values by resetting
the module’s nonvolatile configuration storage parameters and restarting the module.
Allow approximately 3 minutes for the module to restart. To restart the module without
losing the settings, use option [2] Restart with Current Settings.
CAUTION
This action deletes all configured settings and replaces them with factory default
values. All configuration settings will be lost.
The following example shows the dialog associated with this option:
VNswitch 900FX
==========================================================
RESTART WITH FACTORY DEFAULTS
* * * * * * * * * * * * * * * * * * * * * * * * * *
IMPORTANT! IMPORTANT! IMPORTANT!
This selection will delete the current configuration
settings and reset the system with the factory default
settings. All configuration settings will be lost.
==========================================================
Press Y to confirm [N]: <Return>
Press Return for Main Menu...
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * *