Product specifications

Configuring the Module in a DEChub ONE 5-3

Using Menus to Configure the Module

This section describes the options that are available from the VNswitch 900FX

INSTALLATION MENU when the module is installed in the DEChub ONE docking

station. Depending on the configuration state of the module, some options may vary.

To modify the configuration, select [5] Go To Local Console.

VNswitch 900FX

===========================================================

VNswitch 900FX INSTALLATION MENU

[1] Restart with Factory Defaults

[2] Restart with Current Settings

[3] Show Current Settings

[4] Configure IP

[5] Go to Local Console

===========================================================

Enter selection: 5 <Return>

[6] Product-Specific Options...