Product specifications

Connecting to the Setup Port
4-4 Installing the Setup Port Cable
Connecting to the Setup Port
To connect to the setup port (Figure 4-1), complete the following steps:
The following legend identifies the setup port cabling in Figure 4-1.
Step Action
1 Ensure that the transmit and receive baud rates on the setup port device
are set to 9600 baud.
2 Connect the setup port device to the setup port connector on either the
MultiSwitch 900 or the DEChub ONE docking station.
Item Description
1 Out-of-Band Management (OBM) Port
2 Setup Port
3 Setup Port Device