Product specifications

Installing the DIGITAL VNswitch 900FX 3-11

How to Install the Module

Task 4: Connect the LDM Port Cable

To perform a remote load/dump/management operation, the LDM cable must be

connected to the LDM port. The LDM port uses straight-through, 10BaseT, 8-pin MJ

connectors.

To connect the LDM port cable to the LDM port (Figure 3-5), complete the following

steps:

Figure 3-5: LDM Port Cable Connection

Step Action

1 Align the release tab on the cable plug (1) with the keyway on the

module’s 10BaseT port connector.

2 Insert the plug into the connector (2) ensuring that the release tab snaps

into the locked position.

NPB-0836-97F

VNswitch 900XA

Fast Ethernet/ATM

B/SA/M