Product specifications

Module Components
3-6 Installing the DIGITAL VNswitch 900FX
Back Panel Components
Table 3-2 describes the back panel components that are illustrated in Figure 3-2.
Table 3-2: Back Panel Components
Item Name Description
1 Locking tab Locks the module into a MultiSwitch 900
backplane or into a DEChub ONE docking
station. Contains the hot-swap switch lever.
2 48-pin connector Provides network and power connections to
the module when the module is installed in a
MultiSwitch 900 or DEChub ONE docking
station.
3 Grounding bolt Provides a chassis grounding connection
between the module and the MultiSwitch 900
or the DEChub ONE docking station.
4 Manufacturing label Lists the module’s part number, serial
number, revision level, and power
requirements.
5 160-pin connector Provides network and power connections to
the module when the module is installed into
a MultiSwitch 900 or a DEChub ONE
docking station.
6 Mounting tab Secures the module when it is installed into a
MultiSwitch 900 or a DEChub ONE docking
station.
7 Grounding fingers Provide additional chassis grounding
between the module and a MultiSwitch 900 or
a DEChub ONE docking station.