- Digital Networks Switch User Guide

44 Configuring and Monitoring the Switch DNswitch 800
Port Broadcast Storm Protect Configuration
Use the Port Broadcast Storm Protect Configuration screen to configure
broadcast storm control for any port on the switch.
Figure 3-37. Port Broadcast Storm Protect Configuration
Parameter Default Description
Broadcast Storm
Protect Mode
Enabled Allows you to enable/disable broadcast storm
control for all ports on the switch.
Protect Status Enabled Enables/disables broadcast control for the port.
When enabled, the switch will employ a
broadcast-control mechanism if the packet-per-
second threshold is exceeded. This mechanism
limits the amount of broadcasts passed by the
port to half of the received packet-per-second
count. The control mechanism remains in effect
until the number of received broadcasts falls back
below the packet-per-second threshold.
Threshold 500 The packet-per-second threshold at which
broadcast control will be employed on the port.