User's Manual

HDuDTA Manual 7
3. Installing
1) Peripheral device setting
A. Connect the All Digital Device to the TV. Use a coaxial cable to connect TV OUT on the
All Digital Device to the ANT jack on the TV
B. Connect the All Digital Device to the TV. Use an HDMI cable (not included) to connect
HDMI OUT on the All Digital Device to the HDMI input on the TV
C. Connect the wall cable source to CABLE IN on the All Digital Device.
D. Connect the AC Adaptor to the POWER input on the All Digital Device. Connect the AC
Adaptor to a power outlet on the wall.
(A surge protected power outlet is recommended.)