Instruction Manual For WC10HD Digital Multimedia Technology Co.
HDuDTA Manual 2 Contents Ⅰ . Installing WC10HD 1. Component .......................................................................................... 3 2. Name of parts and role ....................................................................... 3 2-1. Remote control................................................................................ 5 3. Installing .............................................................................................. 7 Ⅱ . Notice 1. Dolby ........................
HDuDTA Manual 3 Ⅰ . Installing WC10HD 1. Component The following parts are included in the product package. Make sure that you received all the parts. Main body of WC10HD Remote Control Power adaptor RF Cable User Manual HDMI Cable 2. Name of parts and role 1 LED : LED Lights up green when power is on. Lights up red when in Stand-By Mode.
HDuDTA Manual 4 Cable In TV Out HDMI Out CH3/CH4 Power In (Coax Cable) Connects the All Digital Device to a TV, VCR or receiver using a coax cable. (Coax Cable) Connects the All Digital Device to a TV, VCR or receiver using a coax cable. (HDMI Cable) Connects All Digital Device to a high definition TV, VCR or receiver. Selects TV Channel 3 or 4 as the output channel to your TV when the All Digital Device is connected using a coax cable from TV Out. Connects the All Digital Device to a power source.
HDuDTA Manual 5 2-1. Remote control ► Pressing the MUTE button on your remote control will mute the audio. ► Use the VOLUME UP/DOWN buttons (V +/-) on your remote control to raise and lower the volume. ► Use the CHANNEL UP/DOWN buttons (CH +/-) on your remote control to change channels. ► Press the NUMERIC buttons (0-9) on your remote control to tune directly to a specific channel.
HDuDTA Manual 6 ► If the All Digital Device does not tune immediately after entering channel numbers, press the ENTER button on your remote control. POWER Switches the All Digital Device’s power on or into Stand-By Mode. MUTE Mutes the audio. 0~9 Enters Channel Numbers. In text windows, enters PIN-Code Numbers and various characters. Switches between the current and previous channel. In the MENU SYSTEM LAST returns to the previous screen. LAST VOLUME +/- Increases or decreases volume levels.
HDuDTA Manual 7 3. Installing 1) Peripheral device setting A. Connect the All Digital Device to the TV. Use a coaxial cable to connect TV OUT on the All Digital Device to the ANT jack on the TV B. Connect the All Digital Device to the TV. Use an HDMI cable (not included) to connect HDMI OUT on the All Digital Device to the HDMI input on the TV C. Connect the wall cable source to CABLE IN on the All Digital Device. D. Connect the AC Adaptor to the POWER input on the All Digital Device.
HDuDTA Manual 8 Ⅱ . Notice 1. Dolby Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
HDuDTA Manual 9 2. UL Care and Maintenance Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
HDuDTA Manual 10 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.
HDuDTA Manual 11 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
