User's Manual

Problem Possible causes What to do
No Welcome Menu on the
screen after you switched on
the DSR for the first time.
The system is connected by
SCART leads and TV is not in
AV/EXT mode.
If the system is connected by
SCART leads, switch the TV to
the appropriate AV input.
The system is connected by
RF leads.
Check the UHF channel fixed
in your system and tune the
UHF channel properly..
There is interface on your
digital satellite channels, an
existing terrestrial channel or
video signal.
The system is connected by
RF leads and the output
channel of the DSR interferes
with an existing terrestrial
channels or Video signal.
Change the DSR output
channel to a more suitable
channel, or connect the
system by SCART leads.
The RCU is not
working.
Battery exhausted. Change the batteries.
RCU is incorrectly
aimed.
Aim RCU at DSR, or check that
nothing blocks the front panel.
Note : If you have tried all of the actions suggested above, without solving the problem,
please contact your dealer or service provider.
-44-
Trouble Shooting