User's Manual

2) Mute
To mute the sound, press button on the RCU.
To bring back the normal sound, press this key
once again.
3) Audio Control
Press the key repeatedly to select one of three
possible audio settings (Left, Right and Stereo)
The current audio status will be displayed in the
channel information.
Channel Information
Every time you change channels, you will receive
program information for a few second.
While watching channel, you can see the current
channel information anytime by pressing INFO key
on the RCU.
Note : Channel information will be displayed for 6
seconds and disappeared. You can adjust the
display time interval from 2 to 12 seconds.
Volume & Audio Control
1) Volume Control
To increase or decrease volume, use key on
the RCU or keyon the frontpanel.
Note : DSR has 18 volume levels and this shall be
controlled from the adjusted volume level of your
TV.
4) Language Selection
Press the ALT-AUDIO key on the RCU repeatedly
to select audio-language. This is dependent on the
transmission of audio signal from the satellite
which supports multi-language.
-33-
General Function
Position
If you need to adjust the antenna more
accurately to watch a clear channel, press
POSITION key on the RCU and then the position
bar will be displayed. PressE or W key on the
RCU to adjust for clear channel.