User's Manual

1) Antenna : Select your antenna number.
Channel Search-2) Fixed
-26-
2) Satellite : Select a desired satellite using
56 keys or if you press OK key,
the list of satellite will be
displayed so that you can select
easily.
You can see the information of
selected satellite in the right side.
3) Edit Mode
: If you want to edit those
preprogrammed data such as
Transponder, Frequency, Symbol
Rate, Polarization, Skew and 22
KHz, please press MENU key on
the RCU to display the command
box. Check edit mode by pressing
OK key on the RCU and then you
can go into those columns to
change the value.
4) ~ 14) Please refer to DiSEqC 1.2
type antenna.
User Installation