User's Manual

4) Transponder
: Select a transponder using
keys or if you press OK key,
transponder List will be displayed
so that you can select easily.
1) Antenna : Select your antenna number.
Channel Search-1)DiSEqC 1.2
-23-
3) Position : After selecting a satellite, please
select Position button and then
keep pressing E or W key on the
RCU until selected satellite is
locked. If the satellite is locked
correctly, the white color of signal
label bar will be changed to
yellow.
2) Satellite : Select a satellite using
keys or if you press OK key.
Then, the list of satellite will be
displayed so that you can select
easily.
You can see the information of
the selected satellite in the right
side.
Edit Mode : If you want to edit those
preprogrammed data such as
Transponder, Frequency, Symbol
Rate, Polarization, Skew and 22
KHz, please press MENU key on
the RCU to display the command
box. Check edit mode by pressing
OK key on the RCU and then you
can go into those columns to
change the value.
When you press OK key on the
RCU, the message of “Would you
like to set the value of current
positioner?” will be displayed for
your confirmation.
5) Frequency & Symbol Rate
: If you press MENU key on the
RCU in this menu, command box
will be displayed. Check edit
mode by pressing OK key on the
RCU and then you can go into
those columns to change the
value.
User Installation