User's Manual

Antenna Setup-2) Fixed
-22-
1) Antenna : You can select maximum 16
antennas with the combination of
switches.
2) Type : Select your antenna type to be
Fixed.
3) Univ. LNB: Select your LNB type. If you have
universal LNB, select YES
otherwise select NO.
4) LNB Freq. : Enter the proper LNB frequency
referring to your LNB using
numeric key on the RCU or use
KEY PAD displayed by pressing
OK key.
5) Switches (0/12 Volt, 13/18 Volt, DiSEqC)
: You can select the switches with
which you want to configure the
antenna.
6) C/Ku band control
: You can select C/Ku band by
selection of switch type.
After setting all necessaries, press EXIT key to
finish antenna setup menu. The message of “Are
you sure to change the configuration of Antenna
setup?” will be displayed. Please select OK button
on the screen and then wait for saving data.
User Installation