User's Manual

This menu consists of 5 sub-menus as
follows.
- Antenna Setup
- Channel Search
- System Setting
- Parental Lock
- Factory Default
-20-
Antenna Setup-1) DiSEqC 1.2
1)Antenna : You can select maximum 16
antennas with the combination of
switches.
2) Type : Select your antenna type to be
DiSEqC1.2
3) Univ. LNB: Select your LNB type. If you have
universal LNB, select YES
otherwise select NO.
4) LNB Freq. : Enter the proper LNB frequency
referring to your LNB using
numeric key on the RCU or use
KEY PAD displayed by pressing
OK key.
5) Switches (0/12 Volt, 13/18 Volt, DiSEqC)
: You can select the switches with
which you want to configure the
antenna.
6) C/Ku band control
: You can select C/Ku band by
selection of switch type.
User Installation