User's Manual

12 13

Menu Menu

Press the Menu button on your remote control to access the main menu. The menu

will allow you to update your HD STB settings. Press the arrow buttons to navigate

through the menu. Press Exit at anytime to return to watching live TV.

Audio Language è

Select Audio Language, press the OK button on your remote.

Scroll to select the desired Audio Language (if available).

Closed Captioning è

Select Closed Captioning, press OK to change status from On/Off. When

Closed Captioning is turned On. The following options are available; Standard

Service, Enhanced Service, Font Size. Scroll through the available settings

using your arrow buttons. Ensure you select Apply to change the CC setting.

HDMI Setup è

Select TV Aspect Ratio and press the OK button. Select Auto (recommended),

4:3, or 16:9 and press the OK button to select Setting, then choose Apply to

save it. Select TV Output Resolution and press the OK button. Scroll to

highlight Auto (recommended), 1080i, 720p, or 480p and press the OK

button to select the setting, then choose Apply to save it.

Locks Setup ç

The first time you enter Locks Setup, it will prompt you to

Create Locks PIN. Enter your desired PIN and keep that in a safe place to refer to

later. This PIN will be needed to Change PIN, Clear PIN and set Channel Locks.

Set Channel Locks ç

Select Channel Locks; a channel list will appear. Scroll up/down or Page up/down

to highlight the channel you would like to lock. Press the OK button, and you will see

the unlock icon change to lock. This will indicate the channel has been locked and

will require a PIN to be entered to view.

SD Setup í

Using the RF output (To TV port) to connect your TV? Use SD Setup to scale video

to your TV. Select SD Setup and press OK. Select the Aspect Ratio 4:3 or 16:9 using

the OK button. The following options are available; Aspect Ratio, Just Scale, Box,

and Pan and Scan.