WARNING Evolution Digital HD Set-Top Box TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4.
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc tions, may cause harmful interference to radio communications.
HD Thank You for choosing the Evolution Digital HighDefinition Set-Top Box (HD STB). You can now enjoy viewing Standard-Definition (SD) or High-Definition (HD) programming on an analog or digital television set. When connecting the HD STB with an HDMI cable to your HDTV, you will be able to view HD programming with easy-to-use on-screen menus and navigation. 1 setup Setup your HD STB by following the connection diagrams on page 8.
1 HDMI Set-up Cable Connections To TV HDMI Connection è HDMI allows you to take full advantage of the Evolution Digital HD STB highdefinition digital features. 1. Connect the RF coaxial cable to the cable wall outlet and the “CABLE IN” port on the cable box. 2. Connect the HDMI cable to the “HDMI” port on HD STB and the “HDMI” port on your HDTV. HDMI (IN) To Coaxial Wall Outlet To Electrical Outlet OR To TV CABLE IN SD Coaxial Audio/Video Connection ç 1.
Remote Control TV Input* Toggle TV Input NOTE • When inserting batteries, make sure that the polarity (+/-) is correct. • The LED on the top of the remote is a visual indicator that confirms the remote has power when a button is pressed. • Your remote may vary slightly from the one pictured here. However, basic functions should remain the same.
Menu Menu Press the Menu button on your remote control to access the main menu. The menu will allow you to update your HD STB settings. Press the arrow buttons to navigate through the menu. Press Exit at anytime to return to watching live TV. Menu Locks Setup ç The first time you enter Locks Setup, it will prompt you to Create Locks PIN. Enter your desired PIN and keep that in a safe place to refer to later. This PIN will be needed to Change PIN, Clear PIN and set Channel Locks.
FAQs FAQs Why won’t my HD STB turn on? • Double check that the power cord is connected to the HD STB and the AC wall outlet. • If the HD STB is connected to another unit (such as a switched outlet or DVD player), verify that the unit is powered on. Why do I have no sound when viewing cable channels? • Verify that the MUTE button on remote control has not been pressed; try pressing the MUTE button to restore sound for both the HD STB and television. • Verify that the volume on the HD STB is not turned down.
© 2015 Evolution Digital, LLC. All Rights Reserved. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
