User's Manual

8 9
VCR/DVD Player
Connection è
1. Connect a coaxial cable to the cable
wall outlet and the “CABLE IN” port
on the HD Set-Top Box.
2. Connect another coax cable to the
“To TV” port on your HD Set-Top Box
to the “Cable/RF In” port on your
VCR/DVD Player.
3. Ensure coax cable is still connected
from the output port on your VCR/DVD
Player to the “Cable/RF In” port on
your TV.
4. Connect the power cord to the electrical
wall outlet and the “DC 5V IN” port on the
HD Set-Top Box.
To Electrical Outlet
To Coaxial Wall Outlet
CABLE IN
VCR
To VCR
To TV
Cable/RF In Loop Out
2
1. Complete the Cable Connection
steps prior to activating.
2. Have the HD STB Serial Number
available. This can be found on the
bottom of the HD STB or on the
side panel of the product packaging.
3. Have your cable provider customer
account number accessible. This is
typically found on your cable
provider billing information.
4. Activate your HD STB by calling
your cable provider directly.
Note: Installation and activation will not impact your
current existing cable service.
Activate your HD Set-Top Box
Activation essentially “turns on” your digital box in your home and on your cable provider’s network.
Cable Connections Activation
1
2
3
4
Note: Make sure the channel 3/4 switch matches the channel on your TV and VCR/DVD Player. For
example, if your cable box is set to “3”, make sure your TV and VCR/DVD Player is on channel “3”.