User`s guide

16 XRSuper6 User Menu
User Code Authority Levels
System Options Standard Master
Sensor Reset ✔✔
Outputs On/Off ✔✔
Bypass Zones ✔✔
Zone Monitor ✔✔
System Test ✔✔
Arm and Disarm ✔✔
Display Events ✔✔
Date and Time ✔
User Codes ✔
Adding User Codes
1. Access the User Menu.
2. Press the COMMAND key until USER CODES? displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. Press the Select key under ADD to add a new user code.
(You must have a Master user level to add a user to the
system.)
5. At the USER NUMBER: - prompt, enter a user number and
press COMMAND. The displays changes to CODE NO: .
6. Enter a 4-digit user code and press COMMAND. This is the
number the user will use each time they arm, disarm, or make
changes to the system.
User Codes
User Code Level: Master only.
Function: Allows you to add or delete a user from the system or
change their user code or authority level.
There are three characteristics associated with each user code:
10 3812 Master
User Number - Your system supports 16 users. Each user is
numbered from 1 to 16. This number identifies them to the
system and is transmitted to the central station (if your system is
monitored) when they arm or disarm the system.
User Code - Users also have a 4-digit user code they enter into
the keypad when arming or disarming. This user code is kept
secret from other users and is not transmitted to the central
station when they arm or disarm.
Authority Level - The user is also assigned a level of authority
(Master or Standard) by the person administrating the system
that determines the functions they can access.
The table to the right lists system functions users are allowed to
access based on the authority level assigned to their codes at
the time they are added to the system.
User number
User Code
Authority level