User`s guide

12 XRSuper6 User Menu
User Check-in
User Code Level: Master or Standard
Function: This feature allows you to monitor the arrival of latchkey
children or employees by having a special Check-in Report sent
to your numeric pager. Your system must be programmed for the
Pager Direct™ option. The Appendix section of this guide contains
Quick Reference cards for your wallet or purse.
Sending a Check-in Report:
1. After disarming the system, access the User Menu.
(Or press the COMMAND then 7 key and enter your user code
to send a Check-in Report. This feature operates on 32-
character keypads only.)
2. At the USER CHECKIN? display, press any Select key. The
keypad displays USER CHECKIN: 22 ( 22 = user number).
3. The panel sends the Check-in Report containing your account
number and user number to the pager.
Zone Activity Check
User Code Level: Master or Standard
Function: This option allows you to monitor your system for zone
activity. When the programmed time period is exceeded because
no activity is detected, your keypads will sound a steady tone
and display PRESS ANY KEY. When this tone sounds, you can
silence the tone and prevent the panel from sending a “User
Activity Not Detected” report to the central station by pressing
any key before the countdown timer on the keypad display reaches
zero. This restarts the zone activity check time period.
This could be used for a person living alone to detect when they
have not tripped a disarmed zone within a programmed period of
time. This feature can be programmed for you at any time.
Selecting Zone Activity Check:
1. At the ACTIVITY CHECK? display, press any Select key. The
keypad displays ENABLE? YES NO. The default is YES.
2. When NO is selected, the keypad displays CHECK DISABLED
for four seconds and then sends the Activity Check Disabled
message to the central station.
3. When YES is selected, the keypad displays CHECK ENABLED
for four seconds and then sends the Activity Check Enabled
message to the central station.