User`s guide

XRSuper6 User Menu 11
Security Command User Menu
Many of the features of your system have been put into a User
Menu you can access from any Security Command keypad.
Accessing the User Menu
1. Press the COMMAND key until MENU? NO YES displays.
2. Select YES. The keypad displays ENTER CODE: –. Enter your
user code. You can now scroll down through the list of
system features available to your authority level.
User Menu Options
The list below shows the User Menu options in order:
Menu Option Description
USER CHECKIN Check-in with the system to
indicate arrival on premise.
ZONE ACTIVITY CHECK Check the activity on each zone.
SENSOR RESET Reset smoke or glassbreak
detectors that have latched
during an alarm.
OUTPUTS ON/OFF Turn on or off any of the outputs
described in the System Setup
section of this guide.
BYPASS ZONES Bypass or reset a zone.
ZONE MONITOR Add or remove a zone from the
monitor mode.
SYSTEM TEST Tests the system's siren,
communication to the central
station, and backup battery.
USER CODES Add, delete, or change user
codes and authority levels.
DATE AND TIME Change the system’s Day, Date,
or Time.
DISPLAY EVENTS View or print the last 200 events
that occurred on your system.
SERVICE REQUEST Send a message to the central
station requesting service on the
alarm system.
The following pages detail each User Menu item and provide
instructions on when and how to use them properly.