User manual

21 ©RECONYX, Inc.
Avoid Condensation
Moving the camera rapidly between hot and cold temperatures may cause condensation
(water droplets) to form on its external and internal surfaces. You can avoid this by placing
the camera in an airtight, plastic bag and letting it adjust to temperature changes slowly
before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation inside the camera.
Continued use may damage the camera. Remove the memory card and batteries from the
camera and wait until the moisture evaporates completely before resuming use.
Warnings
 Store this equipment out of the reach of children and infants.
 Do not allow water or other liquids to enter the interior of the camera. The interior has not
been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry
with a soft, absorbent cloth. In the event that water or other foreign substances enter the
interior, immediately turn the camera’s power off and remove the camera batteries and
memory card.
 Use of power sources not expressly recommended for this equipment may lead to
overheating, fire, electrical shock, or other hazards.
 Do not short-circuit the battery terminals with metallic objects, such as key holders. It
could lead to overheating, burns, and other injuries.
 Avoid using, placing, or storing the equipment in places subject to strong sunlight or high
temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense
sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire,
burns or other injuries. High temperatures may also cause deformation of the casing.
 When using desiccant, the following precautions should be followed: Keep desiccant out
of reach of children. Desiccant may cause eye or skin irritation; seek medical assistance
for further treatment,
 Check your state/local laws concerning the use of this product.