Specifications

MODEL XR6/XR10

COMMAND PROCESSOR

PROGRAMMING GUIDE

FCC NOTICE

This equipment generates and uses radio frequency energy and, if not installed and used

properly in strict accordance with the manufacturer's instructions, may cause interference

with radio and television reception. It has been type tested and found to comply with the limits

for a Class B computing device in accordance with the specification in Subpart J of Part 15

of FCC Rules, which are designed to provide reasonable protection against such interference

in a residential installation. If this equipment does cause interference to radio or television

reception, which can be determined by turning the equipment off and on, the installer is

encouraged to try to correct the interference by one or more of the following measures:

Reorient the receiving antenna

Relocate the computer with respect to the receiver

Move the computer away from the receiver

Plug the computer into a different outlet so that computer and receiver are on

different branch circuits

If necessary, the installer should consult the dealer or an experienced radio/television

technician for additional suggestions. The installer may find the following booklet, prepared

by the Federal Communications Commission, helpful:

"How to identify and Resolve Radio-TV Interference Problems."

This booklet is available from the U.S. Government Printing Office, Washington D.C.

20402

Stock No. 004-000-00345-4

Information furnished by DMP is believed to be accurate and reliable.

This information is subject to change without notice.