Installation guide

XR6/XR10 Installation Guide Digital Monitoring Products
11
INSTALLATION
rerutcafunaMledoMDIrotceteDesaBDIesaB
fo#
srotceteD
RX
lenaP
rednapxEenoZ
smetsySnoitceteD282SDB enoNA/N0102/0161-517,8-517,517
smetsySnoitceteDHT282SDB enoNA/N0102/0161-517,8-517,517
smetsySnoitceteD052SDB W2BMA0102/0161-517,8-517,517
smetsySnoitceteDHT052SDB LW2BM/W2BMA0102/0161-517,8-517,517
smetsySnoitceteDDH052SDB LW2BM/W2BMA0102/0161-517,8-517,517
ikihcoH/PMD538-KLS5-DHN002-BSH,002-BSH55-BH7 02/01/661-517,8-517,517
ikihcoH/PMD538-RLS3-DH001-6SN55-BH7 02/01/661-517,8-517,517
ikihcoH/PMDB538-RLS6-DHenoNA/N7 02/01/661-517,8-517,517
LSE/lortneSTA924A90SenoNA/N2102/0161-517,8-517,517
LSE/lortneSB125A90SenoNA/N2102/0161-517,8-517,517
LSE/lortneSTXB125A90SenoNA/N2102/0161-517,8-517,517
rosneSmetsyS0011DTSenoNA/N0102517
rosneSmetsyS1511DTSPL011BA/N0102517
rosneSmetsyS0041DTSenoNA/N0102/01517
rosneSmetsyS1541DTSB104B,104BA/N0102/01517
rosneSmetsyS0012DTSenoNA/N0102/01517
rosneSmetsyS0042DTSenoNA/N0102/01517
rosneSmetsyS1542DTS004HD,B104B,104BA/N0102/01517
rosneSmetsySHD1541DTS004HDA/N0102/01517
rosneSmetsyST0012DTSenoNA/N0102/01517
rosneSmetsySTA0042DTSenoNA/N0102/01517
rosneSmetsySTIA0042DTSenoNA/N0102/01517
rosneSmetsySHT0042DTSenoNA/N0102/01517
rosneSmetsySHT1542DTSB104B,104BA/N0102/01517
Powered Zone for 2-Wire Smoke Detectors
11.1 Terminals 25 and 26
A resettable 2-wire Class B powered zone is provided on terminals 25 (positive) and 26 (negative) of the panel. For
programming purposes, the zone number is 10 on the XR10 and zone 6 on the XR6. The zone uses a Model 309, 3.3k
Ohm EOL resistor (provided with the panel) and has an operating range of 8.8 to 14.2 VDC.
Power is dropped from zone 10 any time a Sensor Reset is performed on the panel. Whenever non-Fire and non-
Supervisory zone types are used on zone 10, make the appropriate adjustments to the zone's Armed Action to prevent
false alarms from occurring.
The UL compatibility identifier is: A.
Figure 4: Compatible 2-Wire Smoke Detectors