Specifications

32
“NO HR” is displayed when doing
heart rate controlled programs
(xR6e or xR6ce)
• Are the heart rate cables connected correctly? Unplug and re-connect the
heart rate cables at the back of the console and on the heart rate board
on the back of the seat (you must remove the console back cover and seat
back cover to do this). When re-connecting the cables, make sure you
feel the connectors snap into place or hear a click that indicates a proper
connection.
Heart rate reading seems too
high or too low; or “NO HR” is
displayed when doing heart rate
controlled programs
(xR6e or xR6ce)
Heart rate controlled programs require that you wear a wireless transmitter or
grasp the contact heart rate sensors on the xR6ce. To verify that the wireless
chest strap is working properly:
•
Make sure the electrodes of the wireless chest strap are against your
bare skin. The electrodes are the ribbed portion on the back of the chest
strap.
• For better contact, use water to moisten the electrodes on the side of the
wireless chest strap that sits against your skin.
• Make sure the Octane Fitness logo is facing away from your body and is
right side up.
•
Make sure you have placed the chest strap at the bottom of your pectoral
muscles. Some adjustment to the strap maybe necessary for the strap to
get an accurate reading.
•
Make sure the strap is snug against your body, but not tight enough to
restrict breathing.
•
Have someone else try the strap standing next to the machine to see if it
works on him/her.
•
There may be interference with another electrical product (lights, TV,
personal stereo, wireless network, MP3 players, phones, etc...). Turn off
any other electrical product and check to see if the problem is resolved.
• The battery in the transmitter (chest strap) may be faulty or worn out;
replace the battery and retest.
• If “NO HR” is still displayed on the console, contact your local dealer for
service.
To verify that the contact heart rate grips on the xR6ce are working properly:
•
Wrap your hands around each contact heart rate grip so that the palm of
your hand and your fingers make contact with the metal sensors on the top
and bottom of each grip.
•
Grip the contact sensors firmly and keep your hands steady and in place.
•
Have someone else try the grips to see if it works for him/her.
• If “NO HR” is still displayed, contact your local dealer for service.
Unable to activate Movement
Management (MOM) Mode
(xR6e or xR6ce)
•
Check to see that MOM mode is enabled. Enter User Set-up by pressing
and holding the Level / keys for three seconds.
• Press any / key until “MOM” displays in the matrix window.
• Press Enter until “On” is displayed.
• Press any /  key until “EXIT” displays in the matrix window; press
Enter.
• Press and hold the Program / keys for three seconds to activate MOM
mode.