User`s guide

4
XR5 User’s Guide
LCD Keypad User’s Guide
Keypad Address
The LCD displays the keypad’s current address. The information
cannot be changed by the user. Press the Back Arrow key to exit
the
User Options
function.
Model Number
The keypad model number,  rmware version, and date display,
but cannot be changed.
Fire System Terms
Zone
A zone refers to one or more  re system devices. For example,
smoke detectors on the east side of the premises can be
grouped together under the zone name
EAST SMOKES
.
Central Station Monitoring
Your system can also be programmed to send alarm and trouble
reports to a central station where operators can dispatch the
appropriate authorities.
Status List
Status is a feature that automatically displays the status of your
system on the keypads. The Status List displays alarm or trouble
conditions on zones and trouble conditions that occur with AC
or battery power or the phone lines. If more than one alarm or
trouble condition occurs at the same time, the keypad displays
this information in order of occurrence.
End User Options
The User Options allow you to make adjustments to your keypad
to best  t your environment and needs.
To access the User Options portion of the keypad, press and
hold the Back Arrow and COMMAND keys for two seconds. The
keypad display changes to SET BRIGHTNESS.
Press the COMMAND key to display the next option or the Back
Arrow key to exit.
Backlighting Brightness
Sets the keypad LCD and AC LED brightness level. At the
SET BRIGHTNESS display, use the left Select key to lower the
keypad brightness. Use the right Select key to increase the
brightness.
Note:
If the brightness level is lowered, it temporarily reverts
back to maximum intensity whenever a key is pressed.
Internal Speaker Tone
Sets the keypad internal speaker tone. At the SET TONE display,
use the top left Select key to make the tone lower. Use the
right Select key to make the tone higher.
Volume level
Sets the keypad internal speaker volume level for key presses
and prewarn conditions. During alarm, trouble, and prewarn
conditions, the volume is always at maximum level. At SET
VOLUME LEVEL, use the left Select key to lower the keypad
volume. Use the right Select key to raise the volume.