User`s guide

2
XR5 User’s Guide
LCD Keypad User’s Guide
LCD Keypad User’s Guide
RESET Key
Pressing the RESET key performs a sensor reset and silences the
alarm bells.
TEST Key
Pressing the TEST key performs a system test.
DRILL Key
Pressing the DRILL key displays a prompt “SURE? YES NO”. Press
YES to begin the  re drill. Press NO to return to the status
list.





   
   
 
   
   













630F Fire Command Center
About the 630F LCD Keypad
The 630F LCD keypad has many features to allow you to properly
operate the system and review previous event history. The
keypad provides a passcode protected User Menu where you
can access the functions needed to operate the system. See
Keypad User Menu
. In addition to the User Menu, items on the
following pages list speci c and common operational features.
The
630F LCD Keypad
All of the 630F Fire Command Center keys, except the four
function keys, can be used at any time without turning the
keyswitch. You can only use the four function keys when the
keyswitch is turned to the enable position. It is not necessary
to use the keyswitch when using a user code to perform
operations.
The following descriptions and illustration highlight the speci c
630F Fire Command Center features.
Four
Function Keys
The 630F Fire Command Center is designed with four keys on
the left side of the keypad. After turning the keyswitch, you
can quickly perform vital functions using these four keys.
SILENCE Key
Pressing the SILENCE key silences the alarm bells.