User`s guide

LCD Keypad User’s Guide
XR5 User’s Guide
9
Display Events
Function:
Allows you to review up to 16 past events that
occurred on your system in the order of their occurrence.
The system records two event types:
Zone Events
- Records zone alarms, troubles, restorals, and
service.
Supervisory
- Records problems with the system’s hardware
components.
The system’s memory can hold up to 16 events. After 16 events
are in memory, any new event causes the oldest event to be
cleared.
1.
Access the User Menu.
2.
Press COMMAND until
DISPLAY EVENTS?
appears.
3.
Press any Select key. The keypad displays the  rst
recorded event. Use COMMAND to scroll down through
the event displays.
Use the Back Arrow key to scroll back up through the event
displays. If you press the Back Arrow key when you  rst enter
Display Events, the keypad returns to the Status List.
Zone
Event Displays
# FIRE ALARM
The display actually contains three separate sections.
#
- Records the zone number. Press the Select key under the
zone number to display the custom zone name programmed into
the system.
FIRE
- This is the type of zone on which the activity occurred.
There are three possible zone types you may see on your
keypad.
FIRE - Fire
SUPV - Supervisory
AUX1 - Auxiliary 1
ALARM
- This is the event that occurred. There are 3 event
types:
ALARM
TROUBLE RESTORE
Zone Bypass Event Displays
# BYPAS
BYPAS -
This zone has been bypassed by the system.
RESET
- This zone has been reset by the system.
Press the Select key under the zone number to display the
custom zone name programmed into the system.