User`s guide

8
XR5 User’s Guide
LCD Keypad User’s Guide
System Test
Function
: Tests the battery, alarm bell or siren, and
communi cation to a central station. The System Test function
begins automatically as soon as you select it.
1.
Access the User Menu. Press the COMMAND key until
SYSTEM TEST?
displays.
2.
Press any Select key. The system test begins
automatically and the keypad displays:
1)
BELL SOUNDING
during a two second bell test,
then:
2)
BATTERY - OKAY
or
BATTERY - TRBL
or BATTERY - TRBLor
to indicate
the condition of the battery, then:
3)
*
TRANSMIT TEST
and
ATTEMPT NO : 1
during the
transmit test, then:
4) *
TRANSMIT OKAY
or
TRANSMIT FAILED
to show the
results of the transmit test, then:
5)
TEST END
to indicate the System Test is complete.
6)
You can cancel the transmit test by pressing the
Back Arrow key.
* The transmit tests are not applicable for local
systems.
Fire Drill
Function:
Allows you to practice  re drill evacuations.
1.
Access the User Menu. Press COMMAND until
FIRE DRILL
displays.
2.
Press any Select key. The keypad displays
SURE? NO
YES
. Press the Select key under
YES
. The system rings
the bells until you enter the user code or until the
programmed bell time expires.
User Codes
Function
: Allows you to change the user code number you
enter at the keypad.
NOTE:
The user code must always have 4 digits.
1.
Access the User Menu.
2.
Press
COMMAND
until
USER CODES
displays. Press any
top row key.
3.
The keypad displays
CODE NO: * * * *
. Press any top
row key to clear the existing user code.
4.
The keypad displays
CODE NO: —
. Enter a new 4-digit
user code.
If the code you entered is a special service code used internally
by the system, the keypad displays
ALREADY IN USE
. You must
enter a different user code.