Specifications

ManualsBrandsDigital Monitoring ManualsHome building and DecorXR5

XR5 Programming Guide Digital Monitoring Products

inTroduCTion

1.6 Special Keys

POWER

TROUBLE

ALARM

COMMAND

1234

5678

ABCDEF GHI JKL

MNOPQR STU VWX

ENABLE

SILENCE

RESET

TEST

DRILL

Fire Command Center

LCD Display

Select Keys

COMMAND Key

Back Arrow Key

Function Keys

COMMAND Key



step of a programming sec tion. As you go through the programming, the keypad display shows any current

programming already stored in the panel memory. If no change is required for a prompt, press the







Back Arrow Key

Use the Back Arrow key to back up one step while in the programming menu or within a programming sec-

tion. The Back Arrow key also allows you to correct an error by erasing the last character entered.

Select Keys

The top row of keys are called the Select keys. When the Programmer displays an option for you to select,

such as YES or NO, you press the Select key under the option you want to enable.

The Select keys also allow you to change programming infor mation currently in the panel memory. As

you step through each program option, the keypad displays the current information. To change this

information, press the appropriate key under the display then enter the new information

If you are changing a phone number or account number, press the Select key followed by the appropriate

digit keys. If entering a communica tion type or choosing a programming option, the keypad displays the

available response options above the Select keys. When there are more than four re sponse options avail-



on the display. Pressing the Back Arrow key allows you to review the previous four choices.

The Select keys are also used for se lecting a section from the pro gramming menu. This is done by pressing

any one of the Select keys when the programming section name you want displays.

Four Function Keys

The four function keys allow the user to quickly and easily perform functions on the 630F. The factory



position before the keys activate. The keyswitch does not affect the other keys on the keyboard: They are

operational at all times with a user code.

SILENCE Key



RESET Key

smoke detectors that have latched in alarm and clear the display of alarms.

TEST Key

the central station, and the backup battery.

DRILL Key





drill.