Specifications

Digital Monitoring Products XR5 Programming Guide
18
aPPendiX
Appendix
10.1 Keypad Status List
The Status List is the current status of the system or records of recent system events that display on the
alphanumeric keypads.
If an event occurs on the system, such as an AC failure, the keypad displays the AC POWER -TRBL
message. This is a system event that is placed into the Status List to alert the user to a problem.
Some Status List items remain in the display until manually cleared and some are cleared automatically
when the condition returns to normal. Below is a complete list of status and event displays the keypad can
show in the Status List:
Description Must be cleared manually?
Fire and Supervisory zone alarms Yes - by Sensor Reset
Fire and Supervisory zone troubles 
All other zone alarms 
System monitor troubles
(AC and battery trouble)

Zone bypasses 
Remote keypad messages




If there are no items in the Status List, the keypad displays SYSTEM NORMAL.
10.2 Manual Telephone Line Seizure
This feature allows you to connect with a remote receiver either by having the panel pick up the phone
line while the receiver is ringing the line or by entering a phone number for the panel to dial. This feature

connect to the panel and upload a custom program.
How it Works

display changes to NBR PICKUP.
NBR

slowly and deliberately. The panel dials each number as it is pressed. If you make a mistake, press the
Back Arrow key. The panel stops dialing and returns to the NBR PICKUP display.
You can enter up to 15 characters for the phone number. To enter a # (pound sign) or * (asterisk) press the
0 (zero) key and third Select key (pound) or fourth Select key (asterisk).
The panel makes ten attempts to reach the receiver. If, while attempting to contact the receiver, the
panel needs to send an alarm report, the dialing attempts stop and the panel uses the line to send its
report.
PICKUP
The panel immediately seizes the phone line and sends a carrier tone to the receiver.
10.3 2-Button Panic Keys

Pressing the two right Select keys sends a zone 39 Fire alarm to the central station receiver.