Specifications
XR5 Programming Guide Digital Monitoring Products
Stop
8.1
STOP
Stop
At the STOP prompt, press any Select key to exit the XR5FC or XR5SL panel
programmer function. When selected, the panel performs an internal reset and
exits the programmer.
The Stop function clears the panel Status List.
During the Stop function, all keypad displays are momentarily blank for two seconds.
Afterwards, the programming function is terminated and the keypads return to the
Status List display.
Set Lockout Code
9.1
SET LOCKOUT CODE
Set Lockout Code
STOP prompt displays SET LOCKOUT CODE. This feature
allows you to program a special code that is then required to gain access to the
panel internal Programmer through the keypad.
Changing the Lockout Code
You can change this code at any time to any combination of numbers from 3 to 5
digits long (100 to 65535). Do not use leading zeros for the lockout code.
1. Press any Select key. The display changes to ENTER CODE: -.
changes to CODE CHANGED.
store it in a safe place. Lost lockout codes require the panel to be sent back into
DMP for repair.
SeT LoCkouT Code
SToP