Specifications

Digital Monitoring Products XR5 Programming Guide

PANEL PROGRAMMER MODEL XR5FC / XR5SL

FIRE COMMAND

PROGRAMMING GUIDE

When using the XR5FC/XR5SL panel for any listing organization's approved methods, refer to this manual and the

Specications Compliance section of the XR5FC/XR5SL Installation Guide (LT-0299). These documents outline the instal-

lation and programming requirements of all applications for which the XR5FC/XR5SL is approved.

FCC NOTICE

This equipment generates and uses radio frequency energy and, if not installed and used properly in strict accordance with

the manufacturer's instructions, may cause interference with radio and television reception. It has been type tested and

found to comply with the limits for a Class B computing device in accordance with the specication in Subpart J of Part 15

of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. If

this equipment does cause interference to radio or television reception, which can be determined by turning the equipment

off and on, the installer is encouraged to try to correct the interference by one or more of the following measures:

Reorient the receiving antenna

Relocate the computer with respect to the receiver

Move the computer away from the receiver

Plug the computer into a different outlet so that computer and receiver are on different branch circuits

If necessary, the installer should consult the dealer or an experienced radio/television technician for additional suggestions.

The installer may nd the following booklet, prepared by the Federal Communications Commission, helpful:

"How to identify and Resolve Radio-TV Interference Problems."

This booklet is available from the U.S. Government Printing Ofce, Washington D.C. 20402

Stock No. 004-000-00345-4

Information furnished by DMP is believed to be accurate and reliable.

This information is subject to change without notice.