User`s guide
System Setup XR2500F User’s Guide 13
User Proles Reference
Menu Display Privilege
DIS
OUTPUTS
ALOW: 1234 ___
0 – 250
Changing User Profiles
1. Access the User Menu.
2. Press COMMAND until USER PROFILES? displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. Press the far right Select key, under CHG.
4. At the PROFILE NO: - option, enter a prole number and
press COMMAND. The display changes to PROFILE NAME.
5. Press any Select key to display -. Enter a prole name of up
to 16 characters. The default Prole Name uses the Prole
Number. Enter the name and press COMMAND.
6. At the Arm/Dis AREAS: option, enter the area numbers
(1-32) for arming and disarming assigned to this prole.
7. The keypad displays ACCESS Areas: . Enter the area numbers
(1-32) assignment to allow door access for this prole. Press
the COMMAND key.
8. The keypad displays OUTPUT GROUP: -. Enter the number
(1 through 20) for the Output Group assigned to this prole.
Press the COMMAND key.
9. The keypad displays each of the menus as shown in the
Prole Table. You then enable or disable the menu function
for this prole number. Select YES or NO and press the
COMMAND key to advance to the next menu selection.
10. When you complete Selecting all User Prole menu
assignments, the keypad displays the PROFILE CHNGD
message for 4 seconds, indicating the prole is changed.
TEMP CODE
When you select YES for this menu option, and this prole is
assigned to a user code (see next section), the keypad displays
TEMP EXPIRE DATE:. Enter the ending date for the prole to
expire. Default is seven days from today. The system deletes
Temp users at 12:00 AM on the last date.