Specifications

XR2500F Fire Detection Specification 11

6.0 COMPILED DETECTION EQUIPMENT LISTING

6.1 Hard-wired

Hard-wired detection equipment shall communicate to the system by way of the FACP loop expansion bus.

The equipment shall have a three (3) year warranty as stated in the current DMP Product Catalog and meet

or exceed features offered in the following products:

• Bus Splitter/Repeater Module – DMP Model 710/710F

• Zone Expansion Module - DMP Model 725

• Output Expansion Module - DMP Model 716

• Graphic Annunciator Module - DMP Model 717

• Non-addressable devices shall connect directly to zone expansion modules:

Manual Fire Alarms – DMP Models 850S, 850D (pull stations)

Heat Detectors – DMP Models 601, 602, 603, 604

Smoke/Smoke Heat Detectors – SLR-835B, SLR-835BH, Model 521B

• Addressable devices

Smoke/Smoke Heat Detectors – SLRLX and SLR-835 or SLR-835H, 521LX, 521LXT

Manual Fire Alarms - 850S/711, 850D/711 (pull stations)

Zone Expanders

DMP Models 711, 711E Single Zone Expander Module

DMP Models 714, 714-8, 714-16 (4, 8, and 16 Zone Expander Modules)

DMP Models 715, 715-8, 715-16 (4, 8, and 16 Zone Expander Modules

powered for two wire Smoke detectors)

6.2 Notification Devices

Notification equipment shall be FACP activated by way of the supervised bell output module. The

equipment shall have a three (3) year warranty as stated in the current DMP Product Catalog and meet or

exceed features offered in the following products:

• Bells – DMP Model 806-6, 806-10, 906-6, 906-10

• Horns - DMP Models 801, 802, 803, 901, 904, 904WP

• Strobe – DMP Models 821, 822, 921-MCW, 922-MCW,

• Horn Strobe – DMP Models 802WP-75W, 823, 923-MCW, 924-MCW, 924WP-75W

• Notification Modules – DMP Models 865, 866, 867

• Notification/Synchronization Modules – DMP Models 831, 832

6.3 Power Supplies and Batteries

Power supply and battery devices shall maintain system operation. The batteries shall be checked and

replaced every three to five years. The equipment shall have a three (3) year warranty as stated in the

current DMP Product Catalog and meet or exceed features offered in the following products:

• Power Supply – DMP Model 504-24, 115 VAC, 24 VDC

• Power Supply – DMP Model 504-24LX, 115 VAC, 24 VDC (addressable)

• Power Supply – DMP Model 505-12, 115 VAC, 12 VDC

• Power Supply – DMP Model 505-12LX, 115 VAC, 12 VDC (addressable)

• Power Supply – DMP Model 508, 115 VAC, 12 or 24 VDC

• Battery – DMP Model 365, 12 VDC, 9.0 Ah sealed lead-acid

• Battery – DMP Model 366, 12 VDC, 18.0 Ah sealed lead-acid

• Battery – DMP Model 367, 12 VDC, 7.7 Ah sealed lead-acid

• Battery – DMP Model 369, 12 VDC, 7.0 Ah sealed lead-acid