Installation guide

Digital Monitoring Products XR2500F Installation Guide
18
INSTALLATION
XR2500F Installation Guide Digital Monitoring Products
19
INSTALLATION
14.3 Accessory Devices
Interface Adaptor and Interface Cards
461 Interface Adaptor Card Allows you to connect two or more expansion interface cards to the XR2500F panel. The 461 is an
expansion board that plugs into the panel J6 Interface Connector and is required when using two or more
Interface Cards. Use combinations of Interface Cards for expanding zones, network interfacing, and local
printing.
462N Network Interface Card Allows you to connect the XR2500F to any compatible data network and use its communication capability
in place of standard dial out telephone lines. The 462N also provides an LX-Bus™ for connecting zone
and output expansion modules to the panel. The 462N is listed for Grade AA Burglary communication and
supplementary signaling.
462P Printer Interface Card Allows you to connect the XR2500F to any compatible serial printer providing the user with real-time event
recording. The 462P also provides an LX-Bus™ for connecting zone and output expansion modules.
* 462FM 9600 Baud Modem Allows you to remote-connect to the panel over telephone lines and upload/download at 9600 baud using
a standard Hayes compatible modem. The card shares the phone line with the panel and provides 100
LX-Bus zones and/or outputs.
481 Expansion Interface Card Provides one LX-Bus for connecting up to 100 zone and output expansion modules.
Zone and Output Expansion Modules
710/710F Bus Splitter/Repeater Allows you to increase keypad or LX-Bus™ wiring distance to 2500 feet. Model 710F is for 24 VDC
applications.
711 Single Point Zone Expanders Provides one Class B zone for connecting devices.
712-8 Zone Expander Provides Class B zones for connecting burglary devices.
714, 714-8, 714-16 Zone Expanders Provides Class B zones for connecting non-powered re devices.
715, 715-8, 715-16 Zone Expanders Provides 12 VDC Class B powered zones for connecting smoke detectors, glassbreak detectors, and other
2- or 4-wire devices.
725 Zone Expanders Provides 24 VDC Class B powered zones for connecting smoke detectors, glassbreak detectors, and other
2- or 4-wire devices. Requires 710F Bus Splitter/Repeater.
716 Output Expander Provides four Form C relays (SPDT) and four switched grounds (open collector) for use in a variety of
remote annunciation and control applications.
717 Graphic Annunciator Module Provides 20 zone following annunciator outputs (open collector) for use in a variety of remote annunciation
and control applications for use on the keypad bus only.
Indicating and Initiating Devices
865 Supervised Style Y or Z
Notication Circuit Module
Provides supervised alarm current when using the XR2500F panel bell output and up to 5 Amps at 12 or
24 VDC when using a listed auxiliary power supply. The 865 can supervise 2-wire Style Y or Z circuits for
ground faults, opens, shorts, and shorts with individual LED annunciation.
866 Notication Circuit Module Provides supervised alarm current using the XR2500F panel bell output and up to 5 Amps at 12 or 24 VDC
when using a listed auxiliary power supply. The 866 can supervise Style W circuits for opens and shorts.
867 Style W LX-Bus Notication Circuit
Module
Provides supervised alarm current using the XR2500F panel bell output and up to 5 Amps at 12 or 24 VDC
when using a listed auxiliary power supply. The 867 connects to the XR2500F panel LX-Bus™ and provides
one 2-wire Style W notication circuit for ground fault, open, and short conditions. Individual Bell Relay
addresses Bell Ring styles.
869 Dual Style D Initiating Module Provides two Style D, 4-wire initiating zones for connecting waterow switches and other non-powered re
and burglary devices.
Accessory Modules and Keypads
893A Dual Phone Line Module Allows you to supervise two standard phone lines connected to an XR2500F panel. The 893A module
monitors the main and backup phone lines for a sustained voltage drop and alerts users when the phone
line is bad.
* ePAD™ Virtual Keypads Allows users to control the security system from any computer in the world using the Internet.
LCD keypads Allows you to control the panel from various remote locations. Connect up to sixteen supervised Model
690/690F, 790/790F, 791 Security Command® keypads, 693/793 Easy Entry™ keypads, or 7060, 7063,
7070, or 7073 Thinline keypads to the keypad bus using terminals 7, 8, 9, and 10.
Addressable Smoke Detectors
521LX
SLRLX
Single-zone, addressable module conventional smoke/smoke heat detectors that connect to the LX-Bus.
Includes remote maintenance reporting, drift compensation, and multi-criteria detection.
* These devices have not been investigated by UL and shall not be used in UL installations.
Table 5: Accessory Devices