Installation guide

Digital Monitoring Products XR2500F Installation Guide
12
INTRODUCTION
XR2500F Installation Guide Digital Monitoring Products
13
INTRODUCTION
Fire Command Center
10.1 Description
The XR2500F provides an LCD display and 20-key keyboard for programming and system user operation. The
Fire Command Center is installed on the XR2500F enclosure door. A keyswitch is installed and pre-wired
to the left of the keyboard. The user must turn the keyswitch to enable the four function keys. See the
illustration below.
Figure 10: Fire Command Center LCD and Keyboard
10.2 Connection
The display and keyboard are factory pre-wired to the XR2500F panel terminals 7, 8, 9, and 10. For standby
battery calculations, the display draws 92mA of current in normal standby or alarm condition. See Panel
Standby Battery Calculations. The keyswitch is pre-wired to the membrane keyboard.
10.3 Remote Fire Command Center
Up to fteen Model 630F Remote Fire Command Centers may be remotely attached to the XR2500F system.
See the 630F Installation Guide (LT-0741) for complete information.