User`s manual

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
HB
No
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
NA
Components and waste containing asbestos
No
Components, parts and materials containing
refractory ceramic fibers
No
Components, parts and materials containing
radioactive substances
No
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1-SCREW DRIVER ( + )
Medium size
Description #2 -SCREW DRIVER ( + )
Small size
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Please see the attachments ( User's Manual and Product Expanded Diagram)
2.
3.
4.
5.
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Please refer to the explosion drawing and user’s manual ( Please refer to attachments below)