User`s manual

Control of the Touch Function

Note:

1. Before using the touch function, make sure that USB is connected, the applications

attached to the driver CD-ROM are installed and the Window's operating system is

started.

2. When the touch function is active, make sure there is no foreign object in the areas

encircled in the figure below.

(Figure 5) Make sure there is no foreign object in the encircled areas.

Note:

• Keep the display away from any heat sources such as electric radiators, natural gas pipes or

direct sunlight.

Also keep the display away from excessive dust, mechanical vibration or shock.

• Retain the original carton & packaging materials. They will be convenient for you, if you need to

transport your display again.

• For best protection, pack the display in the original manner of package from the factory.

• To maintain a brand new appearance of the display, clean with soft cloth regularly. Please

remove stubborn stains with soft cleaner rather than strong cleaners such as diluting agent,

benzene or corrosive cleaner as they may damage the display. For the sake of safety, remove

the power plug prior to cleaning.

• The touch function may need about 7 seconds to resume if the USB cable is re-plugged or the

computer resumes from sleep mode (suspend mode).