User`s guide

70 XR550/XR350/XR150 User’s Guide Appendix F
Frequently Asked Questions
This section attempts to answer questions you might have regarding system operation.
Q. If I bypass an exit delay door when I arm the system, will I get an alarm if I come through it later?
A. You will not get an alarm from the door because it is bypassed, but if you happen to walk through a motion detector
space or other armed door inside the premises an alarm activates.
Q.WhenIarmordisarmmyAreasystem,ALL?NOYESdisplays.Doesthismeanallareasinthesystem?
A.SelectingYESarmsordisarmsallareasthatareauthorizedforyourusercode.
Q. How do I create a schedule that starts at 8:00 AM on Monday and ends at 5:00 PM on Friday.
A.Inthedaysoftheweekdisplay,selectMON(Monday).FortheOPENINGTIME?,enter0+8+0+0AM.FortheCLOSING
TIME?,attheMON—:AMPMdisplay,selectMON;thisscrollsthroughthedaysoftheweek.Stopatthedayyouwantthe
scheduletoend.Next,enter0+5+0+0PMintotheFRI—:AMPMclosingtimedisplay.PressCOMMAND.PresstheBack
Arrow key to exit the User Menu.
This sets the opening time to 8:00 AM Monday and the closing time to 5:00 PM Friday. You can substitute any other day or
time in this.WhatdoIdoifIwanttobeinthebuildingpastthescheduledclosing(arming)time?
A. If your system is programmed for closing check, the keypad emits a steady tone prior to the system arming. During this tone, press any
SelectkeytodisplayENTERCODE:.EnteryourusercodeandpressCOMMAND.
The keypad now displays 2HR 4HR 6HR 8HR. Select the number of hours to extend the schedule. If the system is not armed by the
scheduled closing time, a Late to Close report is sent to the central station. If the schedule is extended, a Schedule Change report may
be sent to the central station.