User`s guide

40 XR150/XR350/XR550 User’s Guide User Menu
The keypad then displays END TIME? followed by the display
MON–:AMPM.Enterthenewclosingtimeandselect
AMorPM.Selectwhicheverdaydisplays,forexample,MON,
allows you to scroll through the days of the week and create
a schedule window that spans multiple days.
Note: You must enter a Begin and End time or the system
willnotrecognizetheschedule.
The new schedule is now programmed into your system.
5. The keypad goes back to the SUN MON TUE WED display.
Press the Back Arrow key to enter another schedule.
6. To clear a schedule press DELETE and then AM when the
opening time is requested.
Press the Back Arrow key to exit the User Menu.
Delete a Schedule
Select DEL to delete a schedule number.
1. EntertheSchedulenumber01-99thatyouwanttodelete.
2. The keypad displays DELETE SCHEDULE SURE?   YES   NO.
Select YES to delete the schedule.
3. The keypad displays SCHEDULE NO:  -  DELETED and the
keypad prompts you for the next schedule number to be
deleted.
Press the Back Arrow key to exit the User Menu.
Change a Schedule
Select CHG to edit an existing schedule.
1. Entertheschedulenumber01-99thatyouwanttochange.
2. The keypad displays ENTER SCHEDULE and the schedule
name. To edit the name press any Select key to make
changes.PressCOMMANDtoproceed.
3. Thekeypad displays SELECTWEEK DAY and SUN MONTUE
WED.PresstheCOMMANDkeytodisplayTHUFRISATHOL.
4. Enter the Begin and End times for each day of the schedule.
Refer to Adding a Schedule for more information.
5. The keypad goes back to the SUN MON TUE WED display.
Press the Back Arrow key to enter another schedule.
Press the Back Arrow key to exit the User Menu.
Setting Area, Output, and Door Schedules
The Schedules function allows you to assign up to 8 different
schedule numbers to each area, output, and door access relay
connected to your system. The schedule number allows the
opening and closing times for the area and on/off times for outputs
and door access relays
1. Access the User Menu.
2. PressCOMMANDuntilSCHEDULES?displays.
3. After you have accessed the SCHEDULES? menu and the
schedule options, TIMES  AREAS  DOOR, display, press
the COMMAND key once more and the display changes to
OUTPUTHOLIDAYS.SelectAREAS,DOOR,orOUTPUT.
4. The keypad displays ENTER THE AREA/OUTPUT/DOOR
NUMBER:- , enter the area, output, or door number you
wanttoassignaschedule.PresstheCOMMANDkey.
5. The keypad displays SCHEDULE NO: -. Press any Select
key and enter the schedule number (01 to 99). Press the
COMMANDkey.
6. Thekeypaddisplaysthenextschedulenumberallowingyou
to enter additional programming. To exit the user menu
press the Back Arrow key.