User`s guide

XR150/XR350/XR550 User’s Guide 39User Menu
Schedules
Schedules are ideal for individual area auto arming and disarming
andforcreatingOpening/Closingwindowsduringwhichuserscan
access the building or disarm the system.
The Schedules function allows you to program into the system the
times at which you normally turn your burglary protection on and
off each day of the week. Your system may be pre-programmed
at installation to allow automatic arming and disarming. When
pre-programmed, you can enter a schedule for the arming and
disarming times.
If your system does not use automatic arming, you can use the
Closing Check/Extend feature with Schedules to help ensure your
system is armed manually at a specic time. This option sounds
thekeypadbuzzeranddisplaysCLOSINGTIME!orAREALATE!when
a schedule expires. This reminds users still on the premises to arm
the system or extend the schedule to a later time.
Your system provides you with the following schedules menus:
1. Times allows you to create schedules 01-99 with days of
the week, begin/end times, and holidays.
2. Areas allows you to assign areas to pre-programmed
schedules set in the TIMES menu.
3. Door allows you to choose doors to assign schedules set in
the TIMES menu.
4. Output allows you to choose an output to schedules set in
the TIMES menu.
5. Holiday dates allow you to enter special dates that activate
Holiday Schedules that supersede all other schedules.
6. Favorites allows you to activate a Z-WaveFavorite(1-20).
Setting Schedules
1. AccesstheUserMenuandpressCOMMANDuntilSCHEDULES?
displays. Press any Select key.
2. Thekeypad displaysTIMES AREAS DOOR.PressCOMMAND
to display OUTPUT  HOLIDAYS. Press COMMAND to display
FAVORITES.Selectthefunctionyouwanttoprogram.
TIMES
The keypad displays ADD DEL CHG.
Adding a Schedule
Select ADD to enter a new schedule number.
1. Enter the Schedule number 01-99 that you want to add.
Press the COMMAND key to accept your Selection. Youare
then given the option to enter a Schedule name. Press
COMMANDtoproceed.
2. ThekeypaddisplaysSUNMONTUEWED.PresstheCOMMAND
keytodisplayTHUFRISATHOL.Selectthedayyouwant
the schedule to begin. If you select HOL, go to Setting
Holiday ABC Schedules for additional instructions.
Note: After Selecting the day of the week or holiday for
the schedule to begin, the keypad displays any currently
programmed Begin and End times previously set for that day.
This feature allows you to review programmed schedules at
any time.
3. If Begin and End times already exist, the keypad then
displaysDELETEKEEP.SelectDELETEtoenternewtimes.
4. The keypad then displays BEGIN TIME? followed by the
displayMON–:AMPM.Enterthenewopeningtimeand
select AM or PM.
Enter all schedule times using a 12 hour clock. For example,
toenter6AMyouwouldentera0+6+0+0andselectAM.
For11PMyouwouldentera1+1+0+0andselectPM.