User`s guide

32 XR150/XR350/XR550 User’s Guide User Menu
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
usetheAddUserProlesbrowser.
Changing User Profiles
1. Access the User Menu.
2. PressCOMMANDuntilUSERPROFILES?displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4. SelectCHGtochangeauserprole.
5. At the PROFILE NO: - option, enter a prole number and
pressCOMMAND.ThedisplaychangestoPROFILENAME.
Note: The panel’s authority check determines whether your
User Prole is authorized to change another prole. The
message NOAUTHORITY appears if you are not authorized
tochangetheprole.
6. PressanySelectkeytodisplay-.Enteraprolenameofup
to32characters.ThedefaultProleNameusestheProle
Number.EnterthenameandpressCOMMAND.
7. At the ARM/DIS AREAS: option, enter the area numbers for
arminganddisarmingassignedtothisprole.
8. The keypad displays ACCESS AREAS: . Enter the area
numbers assignment to allow door access for this prole.
PresstheCOMMANDkey.
9. The keypad displays OUTPUTGROUP: -. Enter the number
for the Output Group assigned to this prole. Press the
COMMANDkey.
10. The keypad displays each of the menus as shown in the
ProleTable.Youthenenableordisablethemenufunction
for this prole number. Select YES or NO and press the
COMMANDkeytoadvancetothenextmenuselection.
11.When you complete Selecting all User Prole menu
assignments, the keypad displays the PROFILE CHNGD
message for 4 seconds, indicatingtheproleischanged.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
usetheChangeUserProlesbrowser.
Deleting User Profiles
1. Access the User Menu.
2. PressCOMMANDuntilUSERPROFILES?displays.
3. Press any Select key. The keypad displays ADD DEL CHG.
4.SelectDELtodeleteauserprole.
5. At the PROFILE NO: - option, enter a prole number and
pressCOMMAND.ThedisplaychangestoDELTD.
Note:Usercodesassignedtodeletedproleswillnotfunction.
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
usetheDeleteUserProlesbrowser.
TEMP CODE
When you select YES for this menu option, the keypad displays
EXPIRATION DATE?. Enter the ending date for the prole to
expire.ThekeypaddisplaysEXPIRATIONTIME?.Entertheending
timefortheproletoexpire.ThekeypaddisplaysUSERCODE?.
Enter a user code to activate.
ANTI PASS NO
Anti-passback requires that you properly exit (egress) an area
previously accessed. If you fail to exit through the proper location
you cannot access it until you properly exit. Default is No. See
FailedtoExit(Anti-Passback)formoreinformation.
EASY ARM/DISARM?
When entering your code, Easy Arm/Disarm allows you to
automatically arm or disarm all areas that are assigned to your
code.TheALLNOYES?optiondoesnotdisplaywhenthisoption
is enabled.