User`s guide

XR150/XR350/XR550 User’s Guide 27User Menu
Favorite
Allows you to activate a Z-Wave Favorite.
1.WhenFAVORITES?displays,pressanySelectkey.Thekeypad
displaysFAVORITE:-.
2. Enter a Favorite number from 1-20. Pressing COMMAND
activates the Favorite.
Zone Status
Displaysalistofarmed,bypassed,oralarmedzones.Alsoallows
you to check the status of individual zones. Zone Status can be
usedtogiveyoualistofzonesbycategoryordisplaythecurrent
statusofanindividualzonenumber.Thefourcategoriesare:
• ArmedZones-zonesthatarecurrentlyarmed.
• BypassedZones-zonesthatarecurrentlybypassed.
• AlarmedZones-zonesthathavegoneintoalarmduringthe
current or previ ous armed period.
• Number-enterthenumberofanyzonetocheckitsstatus.
Using the Zone Status Function
1. Access the User Menu.
2. PressCOMMANDuntilZONESTATUS?displays.
3. Press any Select key to display ARM BYPS ALR NBR.
4. SelectARMforalistofzonesthatarecurrentlyarmed.You
canscrollthroughthelistbypressingtheCOMMANDkey.
5. SelectBYPSforalistofzonesthatarecurrentlybypassed.
6. Select ALR for a list of zones that have gone into alarm
during the current or previous armed period.
7. PressNBRandZONENO:-displays.
8. AttheZONENO:-option,enterthezonenumberyouwant
tocheckandpressCOMMAND.
 The zone number and name display followed by the zone
status.Forexample,azonestatusforzone1mightbeBACK
DOOR-OKAY.
 Belowisalistofthezonestatusdisplays:
-OKAY = thezoneisinanormalcondition
-BYPAS = thezoneisbypassed
-BAD = thezoneisinabadorfaultedcondition
9. Afterdisplayingthezonestatus,ZONE:-returnsforyouto
enteranotherzonenumber.
Browser Feature
If you are unsure of the zone number or description, refer to
Appendix B at the back of this guide for a diagram showing you
how to use the built-in Zone Status browser.
Bypass Zones
Allowsyoutobypassazonepriortoarming.
Bypassing is usually done when a zone cannot be restored to
normal.Asignicantbenetofbypassingazoneistoallowazone
in a faulted or bad condition to be bypassed so arming can occur.
Thefaultedzonecanbeservicedthenextday.
A zone can be bypassed only while it is disarmed. Fire, panic,
emergency,andsupervisorytypezonesarealwaysarmed,sothey
can never be manually bypassed.
Bypass Zones can also be used to reset a zone that has been
bypassed and restore it back into the system.
When Bypass Zones is selected, a report can be transmit ted to
your central station.
During arming, when choosing to bypass a zone or device, there
may be a pre-programmed maximum number of zones (up to
8) that can be bypassed in an area. This limit is programmed at
installation.