User`s guide

26 XR150/XR350/XR550 User’s Guide User Menu
Armed Areas Display
Displays all armed area names in the system.
The Armed Areas display lists all of the names of the armed areas
in your system at the keypads.
Using the Armed Areas Function
1. Access the User Menu.
2. PressCOMMANDuntilARMEDAREAS?displays.
3. Press any Select key. The keypad displays the rst armed
area name. To scroll through the list of armed area names,
presstheCOMMANDkey.
4. Iftherearenoarmedareas,thekeypaddisplaysNONE.
Outputs On Off
Allows you to manually turn the system or door access relay
outputsONandOFF.
This function is used to individually turn your system relay and
accessdooroutputsONandOFF.Yoursystemmayusetheseoutputs
to control door access, interior and exterior lighting, heating, air
conditioning, or other appliances.
The names and numbers of the relays connected to your system
are located in the System Setup section of this guide.
OutputscanbeturnedONorOFFregardlessoftheoutputsettings
in Schedules.
Your system may be programmed to require that your user code
prolehaveaccesstoareasassignedtothekeypad.INVALIDAREA
displays when your user code does not have access to the keypad’s
areas and the output does not turn on.
Under certain conditions, some outputs cannot be turned
on. If you select a restricted output, the keypad displays
CANNOTTURNON.
Turning the Outputs ON and OFF
1. Access the User Menu.
2. PressCOMMANDuntilOUTPUTSON/OFF?displays.
3. Press any Select key.
4. EntertheoutputnumberyouwanttoturnONorOFF.The
output number displays.
5. With the output number displayed, select ON or OFF. The
outputthen turns ON orOFFdependingonyour selection,
and remains in that state until you change it. The keypad
displaystherst12charactersoftheoutputordoorname
followed by either ON or OFF for four seconds to provide
visualvericationoftheaction.PresstheCOMMANDkeyto
end the four second display.
6. The system automatically returns to the output or door
optionandanewoutputcanbeselectedtoturnONorOFF.
Refer back to step 4.
7. Press the Back Arrow key to exit the User Menu.
Browser Feature
If you are unsure of the output number, refer to
Appendix B at the back of this guide for a diagram showing you
howtousethebuilt-inOutputsON/OFFbrowser.