User`s guide

XR150/XR350/XR550 User’s Guide 17Arming and Disarming
Disarming the Area System from the keypad
1. PresstheCOMMANDkeyuntilARMDISARMdisplays.During
entry delay this process starts at step 3.
2. Select DISARM to disarm areas.
3. ThekeypaddisplaysENTERCODE:.Enteryourusercodeand
pressCOMMAND.ThekeypaddisplaysALL?NOYES.
4. Select YES to disarm all areas authorized for your user
code.
 Select NO to disarm only certain areas individually. The
keypadthendisplaysthenameofeachareaauthorizedfor
yourusercodefollowedbytheNOYESdisplay.
Select YES to disarm the area displayed.
 SelectNOtonotdisarmtheareaanddisplaythenextarea.
5. If you are disarming the system out of a normally scheduled
time and you have the authority to extend a schedule,
thekeypadthendisplays2HR4HR 6HR 8HR.Select the
number of hours to extend the schedule.
Note: If you do not have the authority to extend a schedule,
this option does not display.
6. Afterallareashavedisplayedandschedulesextended,any
alarms or communication problems that occurred during the
armed period display.
7. If all areas have been disarmed, the keypad next displays
ALLSYSTEMOFF.
Quick Disarming
To quickly disarm a desired area, enter the area number followed
bytheCOMMANDkeywhentheALL? NO YES option displays.
Central Sta tion Report: Your system may be pre-programmed at
installation to transmit a system disarming report to the central
sta tion.
Door Access Disarming: Your system may be programmed to allow
area disarming when a card is presented to a door access reader
located outside of the building. Simply present your card to the
reader and after the card code is validated for the appropriate
authority, a door access is granted and your matching areas are
automatically disarmed. See the Easy Entry™ User’s Guide in
Appendix E.