User guide

38 XT30/XT50 User Guide User Menu
Favorite Schedules
User Code Level: Master only.
Setting Favorite (FAV) schedules
The Schedules function allows you to set up a schedule for the
Favorites programmed in your system. The Favorite will activate at
the scheduled time.
1. Access the User Menu.
2. Press COMMAND until SCHEDULES? displays. Press any Select
key.
3. The keypad displays PRM EXT OUT FAV. Select FAV.
4. At the FAVORITE: – display, enter the Favorite number
(1-20) you want to schedule. Press the COMMAND key.
5. The keypad displays SUN MON TUE WED. Press the COMMAND
key to display THU FRI SAT.
6. Select the day you want to program.
7a. If a time has not been set for the day selected, the keypad
then displays ACTIVATE TIME. This is followed by the display
MON – : AM PM.
Enter the activate time and select AM or PM.
Enter all schedule times using a 12 hour clock. For example, to
enter 6 AM you would enter a 0 + 6 + 0 + 0 and Select AM. For
11 PM you would enter a 1 + 1 + 0 + 0 and Select PM.
7b. If a time has been set for the day selected, the keypad
displays Act Time with the time programmed. Press a Select
key to display the DELETE and KEEP options. Select DELETE
to enter a new time. Select KEEP to keep the current time
setting.
8. The keypad returns to the day of the week display allowing
you to enter another Favorite schedule. To exit the user
menu or to go back to the SCHEDULES? display, press the
Back Arrow key.
Date and Time
User Code Level: Master only.
Function: Allows you to change the current date and time displayed
on the keypad and used by the system for schedules and Display
Events.
Setting the Date and Time
1. Access the User Menu.
2. Press COMMAND until TIME? displays. Press any Select key.
3. The keypad displays the current day and time. Press the
COMMAND key to display the current date. Press the COMMAND
key again to make any changes.
4. The keypad displays TIME DAY DATE. Select TIME to change
the time. The keypad displays – : AM PM. Enter the current
time and select AM or PM.
5. The display changes back to TIME DAY DATE.
6. Select DAY to change the day of the week. The keypad displays
SUN MON TUE WED. If the current day does not display, press
the COMMAND key. Select the correct day.
7. Select DATE to change the date. The keypad displays:
MONTH: - Enter up to two digits for the month.
Press COMMAND.
DAY: - Enter up to two digits for the day.
Press COMMAND.
YEAR: - Enter up to two digits for the year.
Press COMMAND.
The display returns to TIME DAY DATE. Press the Back Arrow key
to exit the User Menu.