User guide

Arming and Disarming XT30/XT50 User Guide 21
is disarmed. When pressed, the Zone Monitor operation is initiated.
As needed, refer to the Zone Monitor section. The keypad displays
MONITOR ON and chimes or displays MONITOR OFF and no tone is
sounded.
Note: The Monitor (Chime) shortcut key applies to all Exit zones in
an Area system and to all zones assigned to the perimeter in
a Home/Sleep/Away or All/Perimeter system.
Check-in Report (Latch Key) Function
System Operation: Area, Home/Sleep/Away, or All/Perimeter.
Your system may be pre-programmed at installation to send
messages to your personal email, PDA, or cell phone. You can use
the Check-in Report (Latch Key), shortcut key 4, to have a Check-
in Report message sent. Refer to Appendix D for Email/Cell phone
message information.
Note: Check-in report function is not supported by Icon keypads.
Easy Exit™ Function
System Operation: Home/Sleep/Away.
You can use the Easy Exit, shortcut key 8, when the system is
armed, to restart the exit delay allowing you to exit the premises
without disarming the system. For example, to let a pet out or
retrieve the newspaper. After the exit delay time expires, the
system automatically rearms.
You can also press the Easy Exit, shortcut key 8 again, to cancel
the exit delay countdown. For example, the telephone rings before
you retrieve the newspaper so you press shortcut key 8 to rearm
the system.