User`s guide

Schedules

Schedules menu is

available on:

1812

1512

1912

1912XR

XR20

XR40

XR200

XR200-485 Classic

XR200-485 Enhanced

XR200-485B Enhanced

XR2400F

XR500

XR500N

XR500E

XR2500F

XR100

R100

The Schedules window allows you to schedule individual area auto arming and disarming.

You may also create a schedule to limit user’s access during specified times of the day.

The Schedules window can also control what times of day a user has authority to arm and

disarm the system.

The Schedules window allows you to program into the system the times for each day of

the week that you normally turn your burglary protection on and off. The system can use

this information to automatically arm or disarm the system.

Shift

: The Shift drop-down menu allows you to program access and arm/disarm schedules.

Select the shift you want to schedule from the drop-down Shift menu. Each panel type has

a different method for assigning shift schedules.

1912XR, XR200, XR2400F, and XR200-485 Classic

These panels allow the assignment of two independent shifts with two unique options for

assigning shifts. You may have either Permanent and Temporary schedules or Primary and

Secondary schedules depending if Primary/Secondary Schedules is selected in

Partition Information.

Shift:

Choose Permanent / Primary to select a Permanent or Primary schedule that will

operate until it is changed. Choose Temporary / Secondary to select a Temporary or

Secondary schedule. The Temporary schedule will expire at the end of the schedule. The

Secondary schedule will operate until changed.

System Link User’s Guide